Handheld TDS Meter
Specifications
Handheld TDS Meter
1 Auto Shut-off and Data Hold
2 Resolution:1 ppm (mg/L)
3 Range: 0~9990ppm (mg/L)
OPERATING INSTRUCTIONS
1.remove the protective cap.
2.press the ON/OFF button once out of the water. The TDS meter will read “000”
3. Immerse the TDS meter into the water no more than 2 inches.
4.wait for the display to stabilize. The TDS meter automatically compensates for temperatures variations.
Once the readout stabilizes(10-30seconds), press the HOLD button to view out of the water.
5.press the ON/OFF button again to turn off the TDS meter. The TDS meter will shut off automatically after
10 minutes of non-use.
6.after usage, shake off the water from your TDS meter or wipe it with a tissue.
Note: If the tester displays a flashing”X10”icon, multiply the reading by 10.
- Home -> Products -> TDS Meter -> Handheld TDS Meter : TDS Meter-A
- Home -> Products -> TDS Meter -> Handheld TDS Meter : TDS Meter-B
- Home -> Products -> TDS Meter -> Handheld TDS Meter : TDS Meter-C
- Home -> Products -> TDS Meter -> BenchTop TDS Meter : TDS Meter-D
- Home -> Products -> TDS Meter -> Portable TDS Meter : TDS Meter-E
- Home -> Products -> TDS Meter -> Portable TDS Meter : TDS Meter-F
- Home -> Products -> TDS Meter -> TDS Indicator : TDS Meter-G









